Skip to main content

Setting Up a Flow Node

This guide is for running a Collection, Consensus, Verification and Execution node. If you are planning to run an Access node then refer to access node setup.

First you'll need to provision a machine or virtual machine to run your node software. Please see follow the node-provisioning guide for it.

Pull the Flow Images

The flow-go binaries are distributed as container images, and need to be pulled down to your host with your image management tool of choice.

Replace $ROLE with the node type you are planning to run. Valid options are:

  • collection
  • consensus
  • execution
  • verification
  • access

_10
# Docker
_10
docker pull gcr.io/flow-container-registry/${ROLE}:alpha-v0.0.1
_10
_10
# Containerd
_10
ctr images pull gcr.io/flow-container-registry/${ROLE}:alpha-v0.0.1",

Prepare Your Node to Start

Your nodes will need to boot at startup, and restart if they crash.

If you are running systemd you can use the service files provided by flow-go. Find them in the Flow Go.

If you are using some other system besides Systemd, you need to ensure that the Flow container is started, the appropriate key directories are mounted into the container, and that the container will automatically restart following a crash.

The systemd files pull runtime settings from /etc/flow/runtime-config.env and any .env files under /etc/flow/conf.d. Examples of these files are also available in the github repo. You will need to modify the runtime config file later.

Systemd

info

If you are not using Systemd, you can skip this step

  1. Ensure that you pulled the latest changes from flow-go repository via git

_10
## Clone the repo if you haven't already done so
_10
git clone https://github.com/onflow/flow-go
_10
_10
## Get latest changes
_10
cd flow-go
_10
git pull origin master

  1. Copy your respective systemd unit file to: /etc/systemd/system
  2. Create directory sudo mkdir /etc/flow
  3. Copy the runtime-conf.env file to: /etc/flow/
  4. Enable your service sudo systemctl enable flow-$ROLE.service (replace $ROLE with your node role - eg. collection)

Docker Configuration

If you are not using Systemd, sample commands for running each Docker container are below. Be sure to replace /path/to/data and /path/to/bootstrap with the appropriate paths you are using.

danger

Do not run your node using docker run command directly without a mechanism for the node to automatically restart following a crash.

info

The actual Docker image tag can be found here for appropriate spork.

System Configuration

Flow nodes create connections to other nodes on the network, which are represented as file descriptors by the OS. Depending on the default limits for your machine, you may need to increase the soft limit available to the node software.

Make sure the soft limit is at least 8192.

You can configure the ulimit for the node's docker container. See the Docker documentation for more details.

Admin Server

Each node can be configured with an admin server, which allows you to control some of the node's configuration, as well as view some of its internal state. You can find a few of the commands in the Admin Server README. Two commands to highlight are:

  • list-commands: which returns a list of all of the available commands for your node
  • set-log-level: which allows you to change the log level of your node at runtime

You can enable the admin server by passing the --admin-addr flag with an interface and port.

⚠️ IMPORANT: The admin server can modify your node's configuration. DO NOT allow access to untrusted clients.

Access


_19
docker run --rm \
_19
-v /path/to/bootstrap:/bootstrap:ro \
_19
-v /path/to/data:/data:rw \
_19
--name flow-go \
_19
--network host \
_19
--ulimit nofile=8192 \
_19
gcr.io/flow-container-registry/access:<applicable docker tag> \
_19
--nodeid=${FLOW_GO_NODE_ID} \
_19
--bootstrapdir=/bootstrap \
_19
--datadir=/data/protocol \
_19
--secretsdir=/data/secrets \
_19
--execution-data-dir=/data/execution_data \
_19
--rpc-addr=0.0.0.0:9000 \
_19
--http-addr=0.0.0.0:8000 \
_19
--admin-addr=0.0.0.0:9002 \
_19
--collection-ingress-port=9000 \
_19
--script-addr=${FLOW_NETWORK_EXECUTION_NODE} \
_19
--bind 0.0.0.0:3569 \
_19
--loglevel=error

Collection


_15
docker run --rm \
_15
-v /path/to/bootstrap:/bootstrap:ro \
_15
-v /path/to/data:/data:rw \
_15
--name flow-go \
_15
--network host \
_15
--ulimit nofile=8192 \
_15
gcr.io/flow-container-registry/collection:<applicable docker tag> \
_15
--nodeid=${FLOW_GO_NODE_ID} \
_15
--bootstrapdir=/bootstrap \
_15
--datadir=/data/protocol \
_15
--secretsdir=/data/secrets \
_15
--ingress-addr=0.0.0.0:9000 \
_15
--admin-addr=0.0.0.0:9002 \
_15
--bind 0.0.0.0:3569 \
_15
--loglevel=error

Consensus


_14
docker run --rm \
_14
-v /path/to/bootstrap:/bootstrap:ro \
_14
-v /path/to/data:/data:rw \
_14
--name flow-go \
_14
--network host \
_14
--ulimit nofile=8192 \
_14
gcr.io/flow-container-registry/consensus:<applicable docker tag> \
_14
--nodeid=${FLOW_GO_NODE_ID} \
_14
--bootstrapdir=/bootstrap \
_14
--datadir=/data/protocol \
_14
--secretsdir=/data/secrets \
_14
--admin-addr=0.0.0.0:9002 \
_14
--bind 0.0.0.0:3569 \
_14
--loglevel=error

Execution


_17
docker run --rm \
_17
-v /path/to/bootstrap:/bootstrap:ro \
_17
-v /path/to/data:/data:rw \
_17
--name flow-go \
_17
--network host \
_17
--ulimit nofile=8192 \
_17
gcr.io/flow-container-registry/execution:<applicable docker tag> \
_17
--nodeid=${FLOW_GO_NODE_ID} \
_17
--bootstrapdir=/bootstrap \
_17
--datadir=/data/protocol \
_17
--secretsdir=/data/secrets \
_17
--triedir=/data/execution \
_17
--execution-data-dir=/data/execution_data \
_17
--rpc-addr=0.0.0.0:9000 \
_17
--admin-addr=0.0.0.0:9002 \
_17
--bind 0.0.0.0:3569 \
_17
--loglevel=error

Verification


_14
docker run --rm \
_14
-v /path/to/bootstrap:/bootstrap:ro \
_14
-v /path/to/data:/data:rw \
_14
--name flow-go \
_14
--network host \
_14
--ulimit nofile=8192 \
_14
gcr.io/flow-container-registry/verification:<applicable docker tag> \
_14
--nodeid=${FLOW_GO_NODE_ID} \
_14
--bootstrapdir=/bootstrap \
_14
--datadir=/data/protocol \
_14
--secretsdir=/data/secrets \
_14
--admin-addr=0.0.0.0:9002 \
_14
--bind 0.0.0.0:3569 \
_14
--loglevel=error

Archive


_18
docker run --rm \
_18
-v /path/to/data:/data:rw \
_18
--network host \
_18
--label=project=flow \
_18
--label=network=mainnet
_18
--label=app=dps
_18
--label=version=v0.26
_18
--name flow-dps gcr.io/flow-container-registry/flow-dps-live:v0.26.1
_18
--address 0.0.0.0:5005
_18
--index /data/index
_18
--bootstrap /data/bootstrap
_18
--checkpoint /data/bootstrap/root.checkpoint
_18
--data /data/protocol
_18
--level debug
_18
--metrics 0.0.0.0:8080
_18
--bucket bucket_name
_18
--seed-address=access_node_address
_18
--seed-key=seed_key

Start the Node

Now that your node is provisioned and configured, it can be started.

danger

Before starting your node, ensure it is registered and authorized.

Ensure you start your node at the appropriate time. See Spork Process for when to start up a node following a spork. See Node Bootstrap for when to start up a newly registered node.

Systemd

  1. Check that your runtime-conf.env is at /etc/flow/runtime-conf.env
  2. Update your environment variables: source /etc/flow/runtime-conf.env
  3. Start your service: sudo systemctl start flow

Verify your Node is Running

Here are a few handy commands that you can use to check if your Flow node is up and running

Systemd

  • To get Flow logs: sudo journalctl -u flow-YOUR_ROLE
  • To get the status: sudo systemctl status flow

_10
● flow-verification.service - Flow Access Node running with Docker
_10
Loaded: loaded (/etc/systemd/system/flow-verification.service; enabled; vendor preset: enabled)
_10
Active: active (running) since Wed 2020-05-20 18:18:13 UTC; 1 day 6h ago
_10
Process: 3207 ExecStartPre=/usr/bin/docker pull gcr.io/flow-container-registry/verification:${FLOW_GO_NODE_VERSION} (code=exited, status=0/SUCCESS)
_10
Main PID: 3228 (docker)
_10
Tasks: 10 (limit: 4915)
_10
Memory: 33.0M
_10
CGroup: /system.slice/flow-verification.service
_10
└─3228 /usr/bin/docker run --rm -v /var/flow/bootstrap:/bootstrap:ro -v /var/flow/data:/data:rw --rm --name flow-go --network host gcr.io/flow-container-registry/verification:candidate8 --nodeid=489f8a4513d5bd8b8b093108fec00327b683db545b37b4ea9153f61b2c0c49dc --bootstrapdir=/bootstrap --datadir=/data/protocol --alpha=1 --bind 0.0.0.0:3569 --loglevel=error

Docker

  • To get Flow logs: sudo docker logs flow-go
  • To get the status: sudo docker ps

_10
$ sudo docker ps
_10
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
_10
1dc5d43385b6 gcr.io/flow-container-registry/verification:candidate8 \"/bin/app --nodeid=4…\" 30 hours ago Up 30 hours flow-go

Monitoring and Metrics

This is intended for operators who would like to see what their Flow nodes are currently doing. Head over to Monitoring Node Health to get setup.

Node Status

The metrics for the node should be able to provide a good overview of the status of the node. If we want to get a quick snapshot of the status of the node, and if it's properly participating in the network, you can check the consensus_compliance_finalized_height or consensus_compliance_sealed_height metric, and ensure that it is not zero and strictly increasing.


_10
curl localhost:8080/metrics | grep consensus_compliance_sealed_height
_10
_10
# HELP consensus_compliance_sealed_height the last sealed height
_10
# TYPE consensus_compliance_sealed_height gauge
_10
consensus_compliance_sealed_height 1.132054e+06